6-200 square line stripping machine except thrum stripped away, there are other common problems, such as wire badly bruised, length is differ, the actual line length is not equal to set the line length, and so on, computer wire stripping machine we should how to solve these problems, kunshan and the extension of mechanical equipment company to answer for you.

(1) in the event of serious wire compression injury, check whether the pressure injury comes from the inlet or outlet wheels and reduce the pressure of the corresponding wheels.

(2) when the actual line length is not equal to the set line length, it should be checked:

1. The inlet wheel pressure is insufficient, and the cable head cannot be peeled off occasionally.

2. The incoming wheel has stolen goods, which need to be cleaned.

3. The clearance of the feed wheel is too large, so it needs to be reduced.

4. The wire itself varies in thickness.

5. The incoming wheel has stolen goods, which need to be cleaned.

The common problems of these computer strippers are not actually failures, and the main reasons are improper equipment Settings and long running time.